Jolida Integrated Tube Amplifier Fusion 3502S w/KT88EH Tubes - Numerous Upgrades

Description

Description:
Jolida Integrated Tube Amplifier Fusion 3502S with KT88EH Tubes - Great condition!. I've loved the sound of this amp with my Klipsch Heresy speakers. Selling only to help with space and remodeling cost for mother-in-law to move in. I've taken excellent care of this amp, and the only flaw I can see is the ground post is slightly bent (came to me that way), which is not noticeable and doesn't interfere with the function or sound in the slightest. I included a photo anyway.
Upgrades:
This amp was sold to me from the original owner as including multiple (expensive) manufacturer upgrades, such as bybee rail and "Naked Z" resistor.  You can go  to Jolida website to read about these in their "upgrades" tab.  These mods are also hand-written on the included user manual.  However, I don't have any way to confirm these since I'm not an audio engineer, so use that information how you may. I do know, if included, the retail price was well over k.
Shipping:
The amp will be shipped in the original box (double-boxed) with the user manual. It is very well-constructed and heavy (51 pounds). I chose "USPS Priority Mail, eBay-calculated"in the auction. If you think we can do better on shipping, message me in advance with your preferred shipping, and I'll check the cost. I'll charge only actual shipping.
I'm starting this at a very low price considering the excellent condition.   Please see the specs below from Jolida, see my feedback, and bid with confidence!
Tubes
- (Note the below ratings are for specific tubes and ratings for the included KT88 tubes are not given below. However, if you are not familiar, I suggest you look up the reviews on the KT88 tubes, and you will be pleased. )
Specs from Jolida
* Rated Output Power:60 W per channel at 8 ohms, 25Hz to 60KHz with 6550 vacuum tubes. 50 W per channel at 8 ohms, 28Hz to 72KH z with EL34 vacuum tubes
* Maximum Power Output:85 W per channel at 8 ohms, 1KHz with 6550 Tubes, 75 W per channel at 8 ohms, 1KHz with EL34 Tubes
* Frequency Response:(at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB* Bandwidth:15Hz to 80KHz + 3dB; 0dB 60 W 1KHz
* Distortion THD:Less than 1% at 20 V output, 28Hz to 15KHz* Circuit Type:Ultra Linear, Class AB* Input Impedance:100Kohms
* Input Sensitivity:600mV at 1KHz for 50/60 watt output* Output Impedance:4 ohms and 8 ohms
* Negative Feedback:Less than 5 dB* Noise and Hum:91 dB below rated output
* Tube Complement:4 pcs. EL34 or 6550 power output; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers
* Power Requirements:110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option)
* Dimensions:17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm) high
* Weight:51 pounds (18 Kg) net, approximately 55 pounds (21 Kg) packaged
* Bias Settings:400 millivolts + 40 mV For EL 34s ot 500 millivolts + 50 mV for 6550s
* Multiple Inputs: Front mounted selector switch-CD, DVD, Tuner and Aux. (for TV, VCR or Computer
* Bypass for a power amp setting, Switching from EL34 to 6550 tubes. Fixed and Variable out.
* Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design. Secondary can be configured for a 4 ohm or 8 ohm load.
* Top panel bias testing terminal with bias adjustment controls. EZ- biasing: turn the screw until the light goes on and the tube is biased.
* No resistors in the signal path.* Connector, Ultra Pure Wire add on options.
* Low Feedback Design: Only 5 dB110 - 120 VAC, 6.3 Amp slo Blo; 200 - 240 VAC, 3.15 Amp Slow Blow Size 5mm X 20mm