-40%
Rare Philips DFA980 same as Marantz PM75 PM-75 TDA1541 DACs Integrated Amplifier
Rare Philips DFA980 same as Marantz PM75 PM-75 TDA1541 DACs Integrated Amplifier
Rare Philips DFA980 same as Marantz PM75 PM-75 TDA1541 DACs Integrated Amplifier
Rare Philips DFA980 same as Marantz PM75 PM-75 TDA1541 DACs Integrated Amplifier
Rare Philips DFA980 same as Marantz PM75 PM-75 TDA1541 DACs Integrated Amplifier

Rare Philips DFA980 same as Marantz PM75 PM-75 TDA1541 DACs Integrated Amplifier

$ 237.59

Availability: 100 in stock
  • Condition: The amp is in excellent working order, and is a 9+ out of 10 in physical condition. Remote and removable aluminum side panels are included. NOTE: the back panel is missing one RCA jack outer ring for the Aux2 input, and there is a small scratch on the top panel which cannot be seen from the front of the amp. I am the original owner of this amp.
  • Audio Outputs: Banana Speaker Jacks
  • Model: PM-75
  • Number of Outputs: 3
  • Type: Integrated Amplifier
  • All returns accepted: ReturnsNotAccepted
  • Color: Black
  • Features: Analog
  • Power: 100 W
  • Audio Inputs: Digital Coaxial RCA
  • Number of Channels: 2
  • Number of Inputs: 8
  • Brand: Marantz

    Description

    For sale is a rare vintage Philips DFA980 integrated amplifier, also sold as the Marantz PM-75 integrated amplifier.  The amp is constructed of audiophile grade components, including dual Philips TDA1541A-S1 (Single Crown) DACs, and is built like a tank.  It produces lots of continuous (100W 8-ohm/120W 6-0hm) and dynamic power (150W 6-ohm/180W 4-0hm) at extremely low THD (0.003%), with a maximum 105dB S/N ratio, providing excellent sound reproduction and imaging/soundstage.  A high-quality phono preamp stage accepts both moving magnet and moving coil phono cartridges.  If you are looking for a Philips TDA1541 DAC and an amplifier, this is a rare chance to have both.
    The amp is in excellent working order, and is a 9+ out of 10 in physical condition.  Remote and removable aluminum side panels are included.  NOTE: the back panel is missing one RCA jack outer ring for the Aux2 input, and there is a small scratch on the top panel which cannot be seen from the front of the amp.  I am the original owner of this amp.
    Detailed Specifications:
    Inputs/Outputs: Phono, Aux 1, Aux 2, Tape 1, DAT/Tape 2, DBS/Tuner
    Digital Inputs: 2 dedicated coaxial and 1 coaxial or optical
    Output Power (20Hz - 20kHz):
    100W+100W (8ohms)
    120W+120W (6ohms)
    Dynamic Power:
    150W+150W (6ohms)
    180W+180W (4ohms)
    220W+220W (2ohms)
    THD (20Hz - 20kHz, 8-ohm load intensity) 0.008%
    Cross Modulation Distortion (SMPTE) 0.008%
    Output Bandwidth (an 8-ohm load intensity, THD 0.03%) 10Hz - 50kHz
    Frequency Characteristic 10Hz - 150kHz, and +0 -3 dB
    Input sensitivity/impedance:
    Phono MC: 250 microvolts/150 ohms
    Phono MM: 2.5mV/47kohm
    High SFT Level: 150mV/20kohm
    Phono maximum permissible input (1kHz) - MC: 20mV, MM: 200mV
    RIAA deflection (20Hz - 20kHz) ±0.3dB
    Signal/Noise Ratio (A network):
    Phono MC:72dB
    Phono MM:83dB
    High Level:105dB
    Tone Control - Bass: 100Hz, ±8dB, Treble: 10kHz, ±8dB
    Digital-Analog-Converter Digital Sampling Frequency 32kHz, 44.1kHz, 48kHz
    S/N Ratio (EIAJ) 106dB
    Distortion (EIAJ) 0.0035%
    Dynamic Range 96dB
    Digital Input - Coaxial: 0.5 Vp-p/75ohms, Optical: -15--25dBm
    Digital Output - Coaxial: 0.5 Vp-p/75ohms
    Power source 100V, 50/60Hz Power consumption 200W